Fluorosilicic Acid (sodium) Dry Aluminium Fluoride For Technology Breakthroughs

Aluminium fluoride are all fluorine chemical terminal product production and demand for the greatest variety, at present, the traditional HF-dried aluminium fluoride from hydrogen fluoride and aluminium hydroxide reaction of gas-solid flow, aluminium fluoride for dry products manufactured. Due to its comparatively good quality wet (specific gravity, low moisture), good reason, in 2005-2010 years of extensive horse, 2005 ~2008 year its profits higher around 20% since 2008 due to the financial crisis and the excess capacity, the device starts less than 50%, its profit margin fell to below 5%. -Dried aluminium fluoride bifluoride prevailing excess capacity, product homogenization of serious problems, dry aluminium fluoride for businesses struggling. Fluorosilicic acid (sodium salt) production of dry-process technology of aluminium fluoride, is an expert in fluorine chemical industry veteran Huang genli, after several years of painstaking research and practice through theories, experimental and pilot production, eventually succeeded. This technology using fluorosilicic acid (sodium) dry aluminium fluoride products manufactured, excellent product quality, hydrogen fluoride to reduce 30~50% production cost, significant economic and environmental benefits, is to resolve the hexafluorosilicic (sodium salt) solution and the best way to break through the dilemma of aluminium fluoride.
The technology to fluorosilicic acid fluoride or sodium fluoride as raw material after removal of Silicon can be broken down, and then produced through the reaction of aluminum hydroxide and aluminium fluoride for dry. Dried aluminium fluoride product quality excellent, the indicators meet the State standards, especially the most critical moisture content and bulk density to meet traditional dry aluminium fluoride standards. In the technology of the dry-type reactions of aluminum fluoride using the new equipment, aluminium fluoride for alternative to traditional dry fluidized bed reactor for the most critical.
Fluorosilicic acid (sodium salt) production of dry-process technology of aluminium fluoride, is an expert in fluorine chemical industry veteran Huang genli, after several years of painstaking research and practice through theories, experimental and pilot production, eventually succeeded. This technology using fluorosilicic acid (sodium) dry aluminium fluoride products manufactured, excellent product quality, hydrogen fluoride to reduce 30~50% production cost, significant economic and environmental benefits, is to resolve the hexafluorosilicic (sodium salt) solution and the best way to break through the dilemma of aluminium fluoride.
The technology to fluorosilicic acid fluoride or sodium fluoride as raw material after removal of Silicon can be broken down, and then produced through the reaction of aluminum hydroxide and aluminium fluoride for dry. Dried aluminium fluoride product quality excellent, the indicators meet the State standards, especially the most critical moisture content and bulk density to meet traditional dry aluminium fluoride standards. In the technology of the dry-type reactions of aluminum fluoride using the new equipment, aluminium fluoride for alternative to traditional dry fluidized bed reactor for the most critical.